失宽 width deviation(2) width lose control(0)   width deviation      At the roughing stands of hot tandem rolling, short stroke control was used for increasing yield and decreasing width deviation.      为了提高热轧带钢的成材率、减少板坯头尾部的失宽量，在热连轧粗轧机组中采用了短行程控制。 短句来源      The results show the width deviation at ends is largely decreased and the length of the width deviation area is shortened.      优化结果表明，板坯头尾部失宽量大幅度减小，失宽区域长度也有所缩短。 短句来源   “失宽”译为未确定词的双语例句      FEM Analysis of Head Width Reduction of Slab during SP Side Pressing      SP侧压过程板坯头部失宽的有限元分析 短句来源      Additionally, this thesis explained the specially features of the slab after rolling. In particular, the head width reducing and the phenomenon of "dog bone" were especially analyzed, in addition to distribution of the slab equivalence plastic strain was discussed.      此外还对轧后产生的一些板形特点给出了合理的解释，特别是对于轧后的板坯头部失宽和狗骨现象进行了重点分析，给出了影响失宽量和狗骨峰值的影响因素，以及他们之间的关系曲线。 另外还对轧制过程中板坯中的等效应变分布情况和残余应力分布情况进行了探讨。 短句来源      ②The slab's width is reduced and the section shape becomes dogbone-like during erect rolling.      ②立轧时，轧件宽度被压缩，断面形成狗骨形，头尾部形成鱼尾形，且造成头部失宽。 短句来源      The deformation behavior of the slab near the front and tail ends has been analysised and modelled with a new type as a function of initial slab thickness H 0 and initial slab width B 0, width reduction ΔE and edger roll diameter De.      分析和比较了头、尾部最大狗骨高度非稳定行为、失宽行为、鱼尾长度与立辊直径、侧压量、板坯来料厚度及宽度之间的关系，并建立了新的数学模型。 短句来源      The condition of width lose controlling can be decreased by impproving technology and equipment.      改善工艺和设备可以减少失宽现象。 短句来源 更多          相似匹配句对      Ma Qikuan and His Painting      其宽其画 短句来源      Paradise Lost      《失乐园》 短句来源      (weak)in width.      宽(弱)。 短句来源      The condition of width lose controlling can be decreased by impproving technology and equipment.      改善工艺和设备可以减少失宽现象。 短句来源      (2) the standard for the reason of repealing awards is not well controlled;      （2）裁决撤销理由的设置宽严失度； 短句来源 查询“失宽”译词为用户自定义的双语例句     我想查看译文中含有：的双语例句 为了更好的帮助您理解掌握查询词或其译词在地道英语中的实际用法，我们为您准备了出自英文原文的大量英语例句，供您参考。   width deviation First, three indexes of gap quality are defined; they are: (1) door gap width deviation relative to design nominal; (2) door gap parallelism; and (3) car-to-car gap consistency. 例句来源       By using RIE and dyed UV positive-type resist, the line-width deviation of 1.2-μm electrodes can be improved to the small value of 95 nm, which is 40% of that in the conventional wet-etched case. 例句来源       These values are then converted to a pulse width deviation from the reference duty cycle. 例句来源                Using 1/10 scale Pb,width behavior during edge rolling with flat rolls and horizonal rolling in roughing stands of hot strip mills is simulated. The spread of edge-rolled slab after thickness reduction has been investigated.The width deviation of slab near the front and tail ends wbers unsteady deformation is predominant has been analysed and modeled with a new type as a function of initial slab thickness Ho and initial slab with Bo,width reduction△E,thickness reduction △H roll diameter D.and Dh.             采用铅作为模拟材料，对热带粗轧机组平辊立轧及随后水平轧制时轧件宽度变化规律进行了实验研究。分析和比较了宽展行为及头、尾部失宽行为与变形工艺参数之间的关系，并得到了相应的数学模型。 文摘来源          Using 1/10 scale Pb, non steady deformation during edge rolling with flat rolls in roughing stands of hot strip mills has been simulated.The deformation behavior of the slab near the front and tail ends has been analysised and modelled with a new type as a function of initial slab thickness H 0 and initial slab width B 0, width reduction ΔE and edger roll diameter De.             采用铅作为模拟材料，模拟比１∶１０，对热带粗轧机组平辊立轧时非稳定轧制阶段变形规律进行了模拟实验研究。分析和比较了头、尾部最大狗骨高度非稳定行为、失宽行为、鱼尾长度与立辊直径、侧压量、板坯来料厚度及宽度之间的关系，并建立了新的数学模型。 文摘来源          A model material Pb was used to simulate edge rolling in loughing stands of hot strip mill. Four parameters which characterized the cross-sectional profile of "dogbone" during steady deformation, and the deformation of the slab around the front and tail ends such as width shortage, "fish-tail", and longitudinal change of "dogbone" shape were analyzed .A series of mathematical models was built up.             以铅为模拟材料，对热带粗轧机组平辊立轧变形规律进行了实验研究，分析了稳定轧制阶段表征立轧时轧件断面特征的４个参量，及非稳定轧制阶段头、尾部最大狗骨高度非稳定行为，失宽行为，鱼尾长度与立辊直径、侧压量、板坯来料厚度及宽度之间的关系，并建立了新的数学模型．　 文摘来源   << 更多相关文摘         相关查询: 头部失宽 宽 失 宽直径的 宽滞后 宽带宽 畦宽 报告失 范围宽 宽分布 超宽 热失  对查询结果不满意

CNKI小工具 在Springer中查有关的英文论文 在知识搜索中查有关失宽的内容 在数字搜索中查有关失宽的内容 在概念知识元中查有关失宽的内容 在学术趋势中查有关失宽 的内容

CNKI主页 |  设CNKI翻译助手为主页 | 收藏CNKI翻译助手 | 广告服务

2008 CNKI－中国知网

京ICP证040431号 互联网出版许可证 新出网证(京)字008号 北京市公安局海淀分局 备案号：110 1081725  2008中国知网(cnki) 中国学术期刊(光盘版)电子杂志社