熔融纺丝      melt spinning(113) melt-spinning(42) melting spinning(13) melt spun(4) melt polymerization spinning(0) fused spinning(0) mele spinning(0) melt-spinning technology(2) melt-spinning method(2) melt spandex(0) melt-filature(1) spinning melt(3)   melt spinning      It was suitable for melt spinning that temperature was 100~150 ℃, revolving speed was 10~15r/min and drawing speed was 2~5m/min.      通过研究发现温度是影响熔融纺丝的关键因素，熔融纺丝较适宜的条件是：温度为100～150℃，挤出机转速为10～15r／min，拉伸速率为2～5m/min。 短句来源      Study on EVA/PP blend melt spinning      EVA/PP共混体的熔融纺丝工艺研究 短句来源      Polytitanocarbosilanes(PTC) with different C content were synthesized by polysilane(PS), polyvinyl chloride(PVC)and Ti(OBu) 4 . Si Ti C O fibers with the specific resistance of 10 3 Ω·cm～10 0 Ω·cm were produced after melt spinning, curing in air and sintering in high temperature.      以聚硅烷 (PS) ,聚氯乙烯 (PVC)和钛酸四丁酯 (Ti(OBu) 4 )合成含碳量不同的聚钛碳硅烷 (PTC)先驱体 ,经熔融纺丝、不熔化处理、高温烧成制备出具有较好工艺性能和电阻率为 10 3Ω· cm～ 10 0 Ω· cm的富碳含钛碳化硅纤维 (Si- Ti- C- O纤维 )。 短句来源      PDLLA/HA composite fibers were produced by melt spinning, and the choices of the process parameters such as temperature, revolving speed and drawing speed etc were discussed.      选用熔融纺丝法制备PDLLA／HA复合纤维，探索了熔融纺丝过程中温度、挤出机转速、拉伸速率、加料速度和冷却速率等一系列工艺参数的选择及其影响因素。 短句来源      MELT SPINNING TECHNOLOGY FOR ELASTIC FIBER      弹性纤维的熔融纺丝技术 短句来源 更多          melt-spinning      Both the properties of mesophase pitch and the spinning parameters affect substantially the spinnability in the melt-spinning process.      研究表明 :中间相沥青本身的性质影响其可纺性并最终影响炭纤维的性能 ,在熔融纺丝过程中 ,要与纺丝工艺参数相互协调 ; 短句来源      Dynamic model of flat fiber in melt-spinning      扁平纤维熔融纺丝动力学模型 短句来源      In this paper, three kinds of different polylactic acid (PLA) for melt-spinning were studied by nuclear magnetic resonance spectra (1H-NMR?13C-NMR), differential scanning calorimetry (DSC) and gel permeation chromatography (GPC).      采用1H-NMR、13C-NMR、DSC和GPC等研究方法对3种不同的熔融纺丝原料用的聚乳酸进行了分析。 短句来源      Based on the manufacture of ethylene-vinyl acetate copolymer (EVA)/polypropylene (PP) blend chips containing 5% - 20% of EVA, a series of composite hollow fibers were fabricated by melt-spinning process using PP as sheath and EVA/PP blend chips as core.      以质量分数为5％～20％的乙烯-醋酸乙烯共聚物(EVA)与聚丙烯(PP)的共混物为芯层、PP为皮层,采用熔融纺丝工艺制备出了皮芯复合中空纤维. 短句来源      The technigues of producing polyester composite interlaced set yarn, composed of drawing 75dtex/24f POY and superfine fiber 110dtex/96f are introduced. The control of condtions of chip drying, melt-spinning and drawing composite are discussed.      介绍了 75dtex／24f POY经牵伸后与超细旦 110dtex／96f复合网络的生产技术，讨论了切片干燥、熔融纺丝和牵伸复合等工艺条件的控制。 短句来源 更多          melting spinning      Design of finishing unit in melting spinning system      熔融纺丝原油上油系统设计 短句来源      The production process of 87 dtex/72 f fine denier PET POY was introduced. The top-quality fine denier POY can be produced on a regular melting spinning equipment by adjusting and optimizing production process, such as controlling chip quality, spinning temperature, quenching speed and temperature, oil pick up, winding speed, etc.      介绍了 8 7dtex/ 72f涤纶细旦POY生产过程 ,通过调整和优化生产工艺 ,如控制切片质量、纺丝温度、侧吹风速度及温度、上油率、卷绕速度等 ,在常规熔融纺丝设备上可生产出优质涤纶细旦POY。 短句来源      The results showed that no esterification occurred during the melting spinning of PGA and PLLA.      结果表明:PGA和PLLA在熔融纺丝时,没有发 生反应。 短句来源      Magnetic-thermo coupled finite element method simulation of micro melting bath in melting spinning      熔融纺丝微熔池磁热耦合有限元数值模拟 短句来源      Through melting spinning of PACS, air-curing, ceramination at 1300 ℃ and sintering at 1800℃ SiC(Al) ceramic fibers with high temperature resistance were obtained.      经熔融纺丝、空气不熔化、烧成与高温烧结等工艺,制备性能优异的耐高温碳化硅纤维SiC(Al)。 短句来源 更多          melt spun      The structure and properties of a novel metallocene polyolefin elastomer,VM2210,were characterized by differential scanning calorimetry(DSC),nuclear magnetic resonance spectrometry(NMR)and capillary rheogoniometry. The VM2210 elas- tomer was melt spun into fibers.      利用核磁共振(NMR)、差示扫描量热(DSC)、毛细管流变仪等测试手段对茂金属聚烯烃弹性体(VM2210)的结构和性能进行了表征,并进行了熔融纺丝。 短句来源      Structure and Property Studies of Poly (Trimethylene Terephthalate) High-speed Melt Spun Fibers      关于聚对苯二甲酸丙二酯高速熔融纺丝纤维结构与性能的研究 短句来源      By comparison of melt index, viscosity, density and orientation of two kinds of melt spun PP POY with or without addition of chemical degradation agent, the effects of degradation agent on PP spinning formation are investigated,The results has shown that molecular weight of PP POY increased with the addition of degradation agent, and distribution of molecular weight greatly became narrow,meanwhile crystallinity and orientation decreased, thus the spinnability of PP chips can be improved.      对添加化学降解剂与否的两种聚丙烯Y2600,经熔融纺丝后测定其POY的热性能、熔融指数、粘度、密度、声速取向等,研究了化学降解改进剂对聚丙烯纺丝成形的影响。 研究结果表明,由于化学降解改进剂的加入,使聚丙烯POY的分子量减小,分子量分布明显变窄; 短句来源      The precursor polymers which were prepared by means of thermal rearrangement reaction of Polyvinylchloride(PVC) and Polydimethysilane(PDMS) were melt spun and cured in air.      采用聚二甲基硅烷 (PDMS)与不同比例的聚氯乙烯 (PVC)共裂解合成制备富碳Si C O纤维先驱体聚合物 . 经熔融纺丝制成聚合物原丝。 短句来源     查询“熔融纺丝”译词为其他词的双语例句 melt polymerization spinning fused spinning mele spinning melt-spinning technology melt-spinning method melt spandex melt-filature spinning melt ......   查询“熔融纺丝”译词为用户自定义的双语例句     我想查看译文中含有：的双语例句 为了更好的帮助您理解掌握查询词或其译词在地道英语中的实际用法，我们为您准备了出自英文原文的大量英语例句，供您参考。   melt spinning Composites of Cu and Pb (immiscible in solid state) were prepared by melt spinning onto a copper disc. 例句来源       %) amorphous metal alloys obtained by melt spinning. 例句来源       Comparative analysis of properties of rapidly solidified foils of Al-Ni-Cr alloys obtained by one-side cooling (melt spinning) a 例句来源       The structure and microhardness of the Al-Ni-Cr-alloy foils obtained by centrifugal melt spinning and two-roller quenching have been studied. 例句来源       A commercial AA2618 alloy was treated through melt spinning at rotating speeds of 20 and 40 m·s-1. 例句来源       更多             melt-spinning Poly(trimethylene terephthalate) fiber melt-spinning: Material parameters and computer simulation 例句来源       Samples consisting of icosahedral Al51Cu12.5Mg36.5 were produced by melt-spinning and characterized by X-ray and electron diffraction. 例句来源       Giant magnetoresistance (GMR) has been observed in Co5Cu95 alloys fabricated by melt-spinning. 例句来源       Off-stoichiometric Ni-Mn-Ga alloys, with various chemical compositions, were produced by melt-spinning technique. 例句来源       Due to high cooling rate realized in melt-spinning technique some amount of amorphous phase was found. 例句来源       更多             melt spun Microstructure of as-melt spun Al-Cu-Mg-Fe-Ni alloy and its variation in continuous heat treatment 例句来源       The as-melt spun ribbons were characterized by a combination of optical microscopy (OPM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). 例句来源       Fine AlxFeNi particles appeared along the grain boundaries at the chilling sides of as-melt spun ribbons, and at both the grain boundaries and in the interior of grains at the free sides. 例句来源       The microhardness of as-melt spun ribbons decreased significantly from the chilling surfaces to free surfaces. 例句来源       Values of the room temperature Hall coefficients and electrical resistivity of amorphous melt spun (Zr0.64Ni0.36)1-xAlx and (Zr0.64Ni0.36)1-xGax alloys forx=0-0.25 are reported. 例句来源       更多             其他 点击这里查询相关文摘     相关查询: 共混熔融纺丝 熔融纺丝温度 熔融纺丝法 熔融纺丝法制 熔融共混纺丝 熔融纺丝技术 增塑熔融纺丝 熔融纺丝工程 熔融纺丝工艺 高速熔融纺丝 熔融纺丝过程 熔融纺丝成形  对查询结果不满意

CNKI小工具 在Springer中查有关的英文论文 在知识搜索中查有关熔融纺丝的内容 在数字搜索中查有关熔融纺丝的内容 在概念知识元中查有关熔融纺丝的内容 在学术趋势中查有关熔融纺丝 的内容

CNKI主页 |  设CNKI翻译助手为主页 | 收藏CNKI翻译助手 | 广告服务

2008 CNKI－中国知网

京ICP证040431号 互联网出版许可证 新出网证(京)字008号 北京市公安局海淀分局 备案号：110 1081725  2008中国知网(cnki) 中国学术期刊(光盘版)电子杂志社