Comparing with general journal bearing,the load capacity of the new bear- ing can be increased by 18%-98%,the attitude angle is de- creased from 43°to 14°and the stable rotate speed can be in- creased by 10%-75% under general work condition.
Aimed at the load capacity of foilthrust, the experimental study was conducted on the test rig, and the maximum load capacity is 44.1 N at 110 000r/min for a bearing with an innerdiameter of 16mm and an outer diameter of 38mm.
For the steel frame structures, a study is carried out on the relationship between the lateral limit load capacity and the story lateral stiffness considering the vertical load's effect on the column's limit moment, P-Δ effect and yielding strength of steel.
This article study the problem in serial communication between PC and intelligence terminal which has RS-485 port An RS-232c/RS485c convertor circuit is also offered in it The design is of good load capacity and does not need power supply
The experiment indicats that although the total download speed is lower than the Bittorrent system,the load capacity of media service system would be 3～4 times than the traditional media service system.
Under its effect, the load capacity of non-Newtonian lubricants is not always higher or lower than that of Newtonian lubricants'.
Surface roughness shows an obvious effect on load capacity when it is greater than one-tenth of the film thickness, and the surface with longitudinal pattern affects the load capacity most.
Failure mode, stress distribution, plastic-zone development and ultimate load capacity of the joints were investigated, and effects of the ring stiffeners on the joint behavior were observed through the experiments.
High rates of slip at points of friction, and also the use of water as a lubricant lead one to consider the problem of the influence of inertial forces on the development of the load capacity of a film of lubricant.
An increase in the load capacity of the lubricant film by 20% at Re = 5000 was noted in .