Mo tape reacts with H2S to form single phase Mo-S compound (MoS2 or Mo2S3, depends on the reaction temperature), then with Pb vapor to form single phase PbMo6S8 layers.
Using Y(TMHD)_3, Ba(TMHD)_2 and Cu (TMHD)_2 as precursors, oxygen as reactant gas and argon as carrier gas, highly c-axis oriented superconducting YBCO tapes were deposited at 830—850℃ on the moving silver metal substates at a tape rate of 10—15cm/h.
The diameter and height growth of the saplings(height 1~3m usually),measured with both vernier callipers and steel tape during a 5 year period,were 0.107cm and 4.76cm,respectively.
people use the tape measure or the caliper to confirm a log's length and diameter of the section and look for it in the manual to obtain one log's volume.
Experiments [1, 2] have revealed a transition accompanied by an appreciable enhancement of pulsations whose period is twice that of the driving vibrating tape.
Results are given of experimental investigations of heat transfer under conditions of forced convection of highly subcooled water in a smooth pipe and with an internal twisted tape under asymmetric heating.
The technique for measuring distortions is described, and the results of measurements are presented for several films cut from different sections of a standard piece of double-sided tape with a length of ~7 m and a useable width of ~20 cm.
The standard plastic base of the tape under investigation is 190 μm thick; ~50-μm-thick layers of diluted PX3 emulsion-gel are applied to its opposite sides.